Pysense

Store: Buy Here

The Pysense shield allows you to sense the environment using 5 different sensors:

• Accelerometer (LIS2HH12)
• Light Sensor (LTR329ALS01)
• Pressure Sensor (MPL3115A2)
• Temperature / Humidity Sensor (SI7006A20)

Getting started

1. Find the libraries for the Pysense in the Pycom libraries repository on Github.
2. Download the files and extract them into the project folder in Pymakr
3. Click the upload project to device button. This will store all necessary files on the device and allow you to import them in the example main.py.
4. Check the REPL. If you have Pybytes activated, the example will send the sensor data to Pybytes automatically.

Examples

The Pysense has several examples:

• Sensing

Features

Datasheet

The datasheet of the Pysense is available as a PDF File

Certifications

The Pysense is certified for:

• ROHS certification

Pinout

The pinout of the Pysense is available as a PDF File

• The user button is connected to P14. This button can also be used to put the Pysense board in dfu-bootloader mode to update the firmware.

Notes

Battery Charger

The board features a single cell Li-Ion/Li-Po charger with a JST PHR‑2 connector. When the board is being powered via the micro USB connector, it will charge the battery (if connected).

Make sure you check the polarity of the battery before plugging it in! Connect the positive side to the side marked with a +.

Mechanical Dimensions

3D model for case design

• Please see the 3D model (step format)