home Introduction

done Pycom Helium Miner
done Pycom Products
done Getting Started
done Tutorials & Examples
done Firmware & API Reference
done Product Info, Datasheets
- done Development Modules
- done OEM Modules
  - done F01 H7
  - done F01 S3
  - done W01
  - done L01
  - done L01 OEM Baseboard
  - done L04
  - done G01
  - done Universal OEM Baseboard
- done Shields
- done Helium Hotspot Miner
- done Pynode+
- done Accessories
- done Notes
done Update Firmware
done Pybytes
done Cellular Services
done Pylife
done Pymesh
done Micropython Support
done Advanced topics
done License

Ask on the forum

Product Info, Datasheets > OEM Modules > L04

L04

Datasheet

The datasheet of the L04 is available as a PDF File

Certifications

The L04 is certified for:

ROHS certification

Pinout

The pinout of the L04 is available as a PDF File

Drawings

The drawings for the L04 are available as a PDF File

Please note that the PIN assignments for UART1 (TX1/RX1), SPI (CLK, MOSI, MISO) and I2C (SDA, SCL) are defaults and can be changed via software.

Power Consumption

Here are some basic power usage measurements for various scenarios.

Idle : 36.2mA - Whilst the LO4 is idle. but awake
Lora transmit : 141mA - Whilst the LO4 is transmitting a Lora Payload
WiFi AP: 116mA - Whilst the LO4 is serving as a Wifi Access Point
Wifi client : 110mA - Whilst the LO4 is serving as a Wifi Access Client
Bluetooth : 116mA - Whilst the LO4 has bluetooth active
DeepSleep : 5.5 uA - Whilst the LO4 is in deepsleep

Tutorials

Tutorials on the L04 module can be found in the [examples](/tutorials/ section of this documentation.

Previous

Next